Item Details

Title: Production of Composite bricks from sawdust using Portland
cement as a binder

Date Published: 2006
Author/s: A.Zziwa S. Kizito A. Y. Banana
Data publication:
Funding Agency :
Copyright/patents/trade marks: ©2006 National Agricultural Research Organisation
Journal Publisher: NARO
Affiliation: Department of Forest Products Engineering,
Makerere University, P.O. Box 7062 Kampala, Uganda
Keywords: Sawdust, Sawmilling, Compressive strength, Density, Composites, Cement

Abstract:

A study was conducted between October 2004 and April 2005 in Kampala District, with the
posibility of making sawdust-cement composites using saw dust.
A total of 48 bricks m : m? in the Faculty of Forestry and Nature Conservation laboratory
based u:: volume “Emj
to cement (3:2 and 2:1), Massmeasured using a weighing
balance and density caimeil front mass and volume of the bricks. The composites were tested
for compressive strength
a universal testing machine, as they cracked due to compression.
The mean compressive strea^li values were 1.61 N nun'2 and 1,986 N nun'2 for 50 x 50 x 50 nun
composites with sawdust to cement ratios of 3:2 and 2:1 respectively; and 1.778 N mm'2 and 2.21N
nun'2 for 100x100x1 OOnun composites with sawdust to cement ratios of 3:2 and 2:1 respectively.
Analysis of variance (ANO VA) indicated significant differences (P<0.05) in strength values of
the Bo compositions. Soaked composites swelled irrespective of the cement to sawdust ratio. The
compressive strength for the soaked bricks yvas approximately 40% of the dry weight strength. The
composite bricks were found to be unfit for paving and medium heavy load wall construction. Due
to their light weight, by imparting decorative mosaics they can be used for interior >vall paneling
and decoration, where minimal wetting is experienced